5
Introduction
Note:
This manual is written with the assumption that the installer possesses skill in the proper use of hand and power tools,
a knowledge of local fire and building codes, and a familiarity with the environment behind the surface of the wall or ceiling
in which the speakers will be installed.
You Will Need
1. A utility knife, electric jigsaw, or other means of cutting a hole in the mounting surface.
2. A #1 Phillips and a flat-blade screwdriver.
3. A wire cutter or stripper for preparing the speaker wires.
336pt speaker system
Side view
Mounting hole
cutout dimensions
7
3
⁄
4
" (197mm)
7
3
⁄
4
"
(197mm)
3
3
⁄
8
" (85mm)
6
3
⁄
4
" (172mm)
