15
MACHINE SET UP TIG WELD
7.Select TIG
2. Connect TIG Torch
to the terminal
5. Connect earth Clamp
to the terminal
4. Connect the Argon Gas Regulator
to the Gas bottle and connect the Gas Hose
from the torch to the Input socket on the
Regulator. Ensure the Gas regulator is in the
off position.
Plug the machine 10Amp (EVO 141) or 15Amp
(ST 181X) input power lead into the wall socket,
ensuring that the power switch on the machine
is in the OFF position.
1
Connect the Argon Gas Regulator to the Gas
bottle and connect the Gas Hose to the Gas
Input socket from the torch to the Regulator.
Ensure the Gas regulator is in the off position.
4
Install the TIG Torch to the machine
by connecting the Dinse Connector to the
Negative Output Connection Socket , the Gas
hose to the regulator and the TIG Torch
Control Socket and screw the nut up firmly.
2
Set up the TIG torch. Place the Tungsten
Electrode into the torch head and ensure back
cap and collet body are screwed in firmly.
3
NOTE: TIG Torch option and regulator shown are not supplied with the machine.
Note:
Pictures may vary from your machine model
Summary of Contents for ST 141X
Page 1: ...DC INVERTER MANUAL ...
