Add
button.
5. Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then
click OK button to install the TCP/IP protocol, it may need the Microsoft
Windows CD to complete the installation. Close and go back to
Network
dialog box after the TCP/IP installation.
6. Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7. Select
Specify an IP address
and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to
192.168.1.253 is good to connect the Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8. Click OK to complete the IP parameters setting.
1.2 Connect to the WLAN Access Point
Open a WEB browser, i.e. Microsoft Internet Explore, then enter
192.168.1.254 on the URL to connect the WLAN Access Point.
1.3 Management and configuration on the WLAN Access Point
1.3.1 Status
This page shows the current status and some basic settings of the device,
includes system, wireless, and Ethernet LAN configuration information.
8
Item System
Description
Uptime
It shows the duration since WLAN Access Point is powered on.
Firmware version
It shows the firmware version of WLAN Access Point.
Summary of Contents for BOSSW73
Page 14: ...III Wireless Security Setup This page is used to configure wireless securit ...
Page 19: ......
Page 22: ...I WEP Key Setup ...