Item
Description
Authentication
Type
Click to select the authentication type in
Open System
,
Shared Key
or
Auto
selection.
Fragment
Threshold
Set the data packet fragmentation threshold, value can be written
between 256 and 2346 bytes.
Refer to 4.10 What is Fragment Threshold?
RTS Threshold
Set the RTS Threshold, value can be written between 0 and 2347
bytes.
Refer to 4.11 What is RTS(Request To Send) Threshold?
Beacon Interval
Set the Beacon Interval, value can be written between 20 and 1024
ms.
Refer to 4.12 What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down menu. Data rate can
be auto-select, 11M, 5.5M, 2M or 1Mbps.
Preamble Type
Click to select the
Long Preamble
or
Short Preamble
support on the
wireless data packet transmission.
Refer to 4.13 What is Preamble Type?
Broadcast SSID
Click to enable or disable the SSID broadcast function.
Refer to 4.14 What is SSID Broadcast?
IAPP
Click to enable or disable the IAPP function.
Refer to 4.20 What is Inter-Access Point Protocol(IAPP)?
802.11g
Protection
Protect 802.11b user.
RF Output Power To adjust transmission power level.
Turbo Mode
Click to enable/disable turbo mode.(
Only apply to WLAN IC of
Realtek
).
Apply Changes
Click the
Apply Changes
button to complete the new configuration
setting.
Reset
Click the
Reset
button to abort change and recover the previous
configuration setting.
Summary of Contents for BOSSW73
Page 14: ...III Wireless Security Setup This page is used to configure wireless securit ...
Page 19: ......
Page 22: ...I WEP Key Setup ...
