Bosslan BOSST60 User Manual Download Page 62

Page: 62 / 63

BOSST60 IAX2 Phone User Manual (V1.43)

Bit 6-7: Unused

TOS is just a hint to the routing algorithm that helps it choose among various

paths to a destination. An internet does not guarantee the type of transport

requested.

Q18 How to use call transfer function?

Two types of call transfer are implemented. Unattended call transfer and

Attended call transfer.

Unattended call transfer: A calls B and is connected with B, A want B to

transfer itself to C. B hold A, press the number of C, then press the “FWD”

key. Now B will hear busy tone and B can hang up now, and if C is

available, C will be ringing and A will hear ringback tone. Now A is

transferred to C. If C is unavailable, A will hear busy tone.

Attended transfer: A calls B and is connected with B, A want B to transfer

itself to C. B hold A, press the number of C, and press the “#”key to call C.

If C is available, C will be ringing, when C answers the call, B is connected

with C and start talking to C. Now B press “FWD” key to transfer A to C.

Once the “FWD” key is pressed, A and C is connected and A can start

talking with C.

If C is unavailable, B will hear busy tone, then B can press “call hold” key to

switch back to A and tell A that C is not there.

Summary of Contents for BOSST60
































































Search results

Summary of Contents for BOSST60

Reviews:

Related manuals for BOSST60

Brands by name

Popular brands

Bosslan BOSST60, User Manual

Search results

Summary of Contents for BOSST60

Reviews:

Related manuals for BOSST60

Brands by name

Popular brands