BOSST60 IAX2 Phone User Manual (V1.43)
56
Q6
After updating BOSST60, the LCD shows "
■■
" and stops ,how to
deal with it?
A: (1) Reset to the factory default; if it still can’t solve the problem ,pls. refer
to (2).
(2) Enter into the safe mode (press " * "button ,then power on till the LCD
shows" *" ) and re-upgrade the IP phone by Palmtool. ( please refer to Q3,
AT320 will have default IP 192.168.1.100 in safe mode)
(3) If you can’t solve the problem , pls. return the phone to the reseller for
repairment .
Q7
Why is the local IP 0.0.0.0?
A:If the BOSST60 “IPtype” is set to “DHCP” and your network doesn’t support
DHCP function.The BOSST60 will shows “0.0.0.0”. Pls. Check your network in
this case.
Q8
Why is the local IP 255.255.255.255?
A: Probably IP phone fails to get IP address if you choose the “IPtype” to
PPPOE, you can set your BOSST60’s “IPtype” to “static” or “DHCP” through
keypad(please refer to chapter 3.1). or reset to the factory default.
