Installation
6
Connecting the Devices
4.
Connect the transmitter on the PL IN
socket
to the Powerlink output of your Bang
& Olufsen
®
device, with the supplied
Powerlink cable. Then connect it to the
power supply (power cord also included).
Transmitter
4.
to the Powerlink
source
5.
Use a Powerlink cable to connect the receiver to the PL OUT socket and the
permanently connected power cord to connect it with your Bang & Olufsen
®
speakers (Powerlink cable included with
your speakers).
Then connect the receiver to the power supply
(Power cord also included with your speakers).
Receiver
5.
to speakers
The status LED on your speakers should now light up red.
6.
The installation is now complete. You can activate the Powerlink source on low
volume - the status LED on your speakers will light green and you will enjoy the
sound of your Bang & Olufsen
®
device in CD-quality.
