background image

General

 

4

 

 

 

The devices may only be operated with the prescribed voltage. Operating the 
device with a higher voltage than specified, is dangerous and can cause fire, 
damage to the device and /or injuries.

 

 

ip media systems GmbH is not responsible for any damage resulting from the 
operation of the device with a voltage other than specified.

 

 

Do  not  attempt  to  modify  or  repair  these  devices  yourself.  Please  contact 
your specialty retailer if service is required. The housing may not be opened 
under any circumstances.

 

 

If the devices are not going to be used for long periods of time (e.g. vacation), 
disconnect the power cord from the wall outlets.

 

 

In case of malfunction, carry out the pairing function again (see page 5). Should 
the malfunction persist, contact your local specialty retailer, or submit an email 
to [email protected].

 

 

Before moving this device, unplug the power cord from the wall outlet.

 

 

Disposal of Old Electrical Devices

 

 

If  this  symbol  is  found  on  the  products,  packaging  and/or 
accompanying  documents,  used  electrical  devices  should  not  be 
disposed of with normal household waste.

 

 

In accordance with your national legislation and the Directives 2002/96/EC, take 
your old electronic devices to the appropriate collection sites, for disposal, re-
treatment and reuse.

 

 

By properly disposing of electrical appliances you help to protect valuable 
resources and prevent possible negative effects on human health and the 
environment that might otherwise arise from inappropriate waste disposal.

 

 

For more information about collection and recycling of old electronic devices, 
please contact your local city or municipal administration, your waste disposal 
service or the dealer of the product.

 

 

[Information on disposal in countries outside the European Union] This 
symbol is only valid within the European Union. If you wish to discard such 
devices, please contact your local authorities or dealer to inquire about the 
proper disposal method.

 

 

 

 

 

 

 

Summary of Contents for Wireless Powerlink II Receiver Set Active













Reviews: