20
No sound
or bad
sound
1. Make sure the source equipment
output support audio format.
2. Restart the transmitter and connect it
again
3. Make sure there is no disturbance
from the same frequency (4.9
～
5.9GHz)
within 50 centimeter.
Register
failure
Ensure the distance between transmitter
and receiver doesn’t exceed supported
distance. If it does, put them closer and
try it again.
Check if source device has been added
on display equipment. If it has, delete it
and make registration again.
Connection
failure
1. Ensure the working distance doesn’t
exceed supported distance. If it does,
put them closer and try it again.
2. Make sure source devices have been
registered every time after software
update.
3. Ensure source devices and display
devices have been registered.
4. If failure occurs again, delete all
registered information and try it again.