18
Press the make pair button on Receiver
Press the make pair button on Transmitter, then
connection light is flashing.
Display device is showing progress bar.
It takes about 3 minutes, making pair successful (the time
depend on different environment, different wireless
distance)
After making pair, the connection is auto and the system
begin to transport av signal.
4. Troubleshooting
Please make sure all the devices is properly connected
and receiver is not in standby mode before you follow the
troubleshooting guide below.
No video
1. Check the status of LED, and check if
the HD media player works normally.
2. Check if the joints and wires are
damaged and make sure they are
correctly connected to corresponding
interface.
1) 3. Ensure there is video on output
devices.
2) 4. Check the receiver is correctly
connected to display equipment.
3) 5. Make sure all devices are working on
