11
10
CHRONOGRAPH MODELS
Simple Chronograph Models with Small Chronograph Seconds Hand at 6
Chronograph
seconds hand
24-hour hand
A: Start/Stop
B: Intermediate time /
Reset to zero
Seconds hand
Chronograph
minute hand
Positions of the crown:
Position 1 - Normal position.
Crown pushed against the case.
Position 2 - Setting the TIME:
Rotate the crown in either direction.
Operating the chronograph:
The chronograph function of this model lets you time an
event lasting up to 59 minutes / 59 seconds in one second
increments. Use the buttons
A
and
B
to operate the
chronograph.
IMPORTANT: The crown must be in position 1, and the hands
of the chronograph must be at 60 (zero) before starting
chronograph. Do not use the chronograph if the crown is in
position 2 or 3. If necessary press button
B
to set the hands
of the chronograph to zero before using it.
Simple chronograph functions:
Measuring a single event without interruptions:
1. Press button
A
to start the chronograph.
2. Press button
A
a second time to stop the chronograph.
3. Press button
B
to reset the chronograph to zero.
Clocking total time of a series of events of short duration
(for example, the exact playing time of a soccer game which
is frequently interrupted):
1. Push button
A
to start the chronograph at the beginning
of the match.
2. Push button
A
to stop the timing when the match is
interrupted.
3. Press button
A
again when play resumes.
4. Repeat steps 2 and 3 until the end of the match.
5. Press button
B
to reset the chronograph to zero.
Synchronizing the chronograph hands:
After a battery change or in case of error, it may be necessary
to adjust the chronograph seconds hand of the chronograph
to align it correctly at the zero position:
1. Pull the crown out to position 2.
2. Press button
A
to adjust the chronograph seconds hand:
Each press of button
A
will move the chronograph hand
forward one second. Press and hold button
A
to advance
the hand rapidly.
3. Once the hand is properly aligned, push the crown back
to position 1.
