26
Setting the DRIVE/Noise Suppressor (DRIVE SELECT Mode)
* The “ADVANCED” wah effect is selected in DRIVE SELECT mode.
* Changing the DRIVE type does not change the distortion tone saved to memory.
1.
Turn off the power to the guitar amp.
2.
Switch off the PW-10’s power.
• When running on battery power:
Disconnect the connection plug from the
INPUT jack.
• When running on power from an AC
adaptor:
Disconnect the plug from the AC Adaptor
jack.
3.
Turn the TYPE knob to ADVANCED.
4.
While holding down the MANUAL/
MEMORY button, switch on the PW-
10’s power.
• When running on battery power:
Insert the connection plug into the INPUT
jack.
• When running on power from an AC
adaptor:
Insert the AC adaptor plug into the AC
Adaptor jack.
The ON/OFF indicator blinks six times,
and the PW-10 switches to DRIVE SE-
LECT mode.
5.
Turn on the power to the guitar amp.
Summary of Contents for V-Wah PW-10
Page 42: ...42 Setting Memo ...
Page 44: ...G6017356 ...
