21
Changing the Operation of the Heel Switch
You can use the following procedure to switch the operation of the rear switch (A/B).
1.
Turn off the power to the guitar amp.
2.
Switch off the PW-10’s power.
• When running on battery power:
Disconnect the connection plug from the
INPUT jack.
• When running on power from an AC
adaptor:
Disconnect the plug from the AC Adaptor
jack.
3.
Turn the TYPE knob to “BASS MIX.”
4.
While holding down the MANUAL/
MEMORY button, switch on the PW-10’
power.
• When running on battery power:
Insert the connection plug into the INPUT
jack.
• When running on power from an AC
adaptor:
Insert the AC adaptor plug into the AC
Adaptor jack.
The ON/OFF indicator blinks five times,
then the MEMORY indicator blinks.
5.
Turn on the power to the guitar amp.
6.
Press the MANUAL/MEMORY button.
The setting is changed, and the unit re-
turns to normal operation (“MANUAL”
mode).
The setting for the distortion added with the
DRIVE knob is stored to “MEMORY.” When
the DRIVE knob is set to OFF after this, then
by using the pedal to activate the heel switch,
you can use the heel switch as a sort of
DRIVE on/off switch.
Summary of Contents for V-Wah PW-10
Page 42: ...42 Setting Memo ...
Page 44: ...G6017356 ...
