7
• Press and release
Select
to set Day Light Saving, “dLS xx” is displayed, press or to enable or
disable the Day Light Saving.
• Press and release
Select
to allow change of “hour” again, but not the 12/24 hour format.
• Press and hold or for 2 seconds to advance the value quickly without repeated presses.
• Selected item will stop flashing when a key is pressed. The selected item will flash again once the
key is released.
• Press
Set
at any time to confirm the setting and return to normal mode.
• TPSE201 / TPSE101 will return to normal mode after 10 seconds if no key is pressed, the clock is
also updated with the latest setting.
Day Light Saving
When enabled, the clock will automatically shift 1 hour ahead of the current set time from the last
Sunday in March at 2:00am until the last Sunday in October at 2:00am.
5-2, 7 days or daily program
• Programmed events must happen in chronological order i.e., the OFF time cannot be earlier than
the ON time and the time of program 3 cannot be earlier than that of program 2 etc.
• Each time can be set between 3.00 am and 2.50 am (on the next day) to allow you to
programme the CH/HW to stay on past midnight, if required.
• The PROG display indicates the program number.
• The CH/HW display indicates whether CH or HW is being programmed. No CH/HW indicator is
displayed in TPSE101.
• The selected item will be flashing and can be adjusted by or key. Program time is changed in
1 minute steps.
• Press and hold or for 2 seconds to advance the value quickly without repeated presses.
• Selected item will stop flashing when a key is pressed. The selected item will flash again once the
key is released.
• The unit will return to normal mode after 10 seconds if no key pressed, Program settings are
stored.
• Program review/changes are allowed even when Temporary Override or Adv Mode is enabled.
5-2 days program selected
• Central Heating and Hot Water have independent programmes set. 3 different time settings
can be programmed for weekdays or weekend. Total 6 settings for TPSE101, and 12 settings for
TPSE201.
• To review or change program, press Set in normal mode to enter programming mode.
The weekday and “SET PROG” are displayed, all other indicators are cleared. The weekdays are
flashing to indicate that it is the selected item to be adjusted.
