12
Press and hold SEL button for 2
seconds to turn this function on/off.
• LOUDNESS
Press
LOUD/DIM
button (15) to
enhance bass response at low volume
levels. LOUD will appear in the display.
Press this button again to defeat the
function.
• ILLUMINATION
Press
LOUD/DIM
button (15) for more
than 2 seconds to adjust the brightness
of the LCD display backlight.
• MUTE
In radio/AUX IN mode, press
/MUTE
button (3) to mute audio level.
Press the button again to release mute
function.
• SELECT MODE
Press
MODE
button (6) to choose
desired listening mode. (e.g. radio
mode to CD mode to CDC mode to
AUX IN mode.
• SET THE CLOCK
Press
DISP
button (1) for more than 2
seconds until the clock is shown on
the display and flashes. Then press the
button (17) to change minutes or
button (16) to change hours.
• DISPLAY PRIORITY
Clock Priority
Press and hold
DISP
button (1) while
pressing button (16) to select Clock
Priority.
Pressing
DISP
button (1) while in Clock
Priority will temporarily display selected
station frequency (in RADIO mode) or
track number (in CD/CDC mode) or
state information (in AUX IN mode).
• Frequency Priority
Press and hold
DISP
button (1) while
pressing button (17) to select
Frequency Priority.
Pressing
DISP
button (1) while in
Frequency Priority will temporarily
display clock.
• SELECTABLE CLOCK DISPLAY
Programs the unit to display the time
when the unit is turned off. While the
unit is turned on, press and hold the
MODE
button (6). Then use the M2
button to activate or defeat this feature.
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (8).
• RESET
Press and hold this button for 10
seconds using a ball-point pen or other
thin metal object. The reset button is
to be activated for the following
reasons:
- Initial installation of the unit when
all wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
NOTE:
If the unit is non-responsive
after pressing the reset button use a
cotton swab soaked in isopropyl
alcohol to clean the electrical contact
on the reverse side of the front panel.
OPERATION
