manualshive.com logo in svg

Boss MD500, Owner'S Manual

Share
Download
Boss MD500 Owner'S Manual Download Page 20

20

Parameter List

BANK

You can specify how patches A and B are connected and output when using simul mode.

 

5

“Using Two Patches Simultaneously (Simul Mode)” (p. 23)

SYSTEM

Parameter

Value

Explanation

CONTRAST

1–16

Adjusting the contrast of the display

INSERT LOOP

OFF, ON

Specifies whether the insert loop function (p. 24) is used (ON) or not used (OFF).

BANK MODE

Specifies the timing at which the patch is changed when you change banks.

WAIT

Switching the bank only changes the indication of the screen, and does not 

switch the patch at that point. When you press the [A] or [B] switch, the bank 

and number are finalized, and operation switches to the next patch.

IMMEDIATE

Operation immediately switches to the next patch when you switch banks.

BANK EXTENT MIN

01–99

Sets the lower limit for the banks.

BANK EXTENT MAX

01–99

Sets the upper limit for the banks.

KNOB LOCK

OFF, ON

Specifies whether knob operations are disabled (ON) or not disabled (OFF).

KNOB MODE

IMMEDIATE, HOOK

When you move a knob, this setting specifies whether control data for that 

knob position is always output (IMMEDIATE) or is output only after the knob 

position has passed through the current value of the parameter (HOOK).

BYPASS

BUFFERED, TRUE

Specifies how the bypass sound is output (buffered bypass or true bypass).

PEDAL ACT

PUSH, RELEASE

Specifies whether the operation occurs when you press the [A], [B], or [TAP/CTL] 

switch or when you release the switch.

FSW MODE

Specifies how the footswitch is used (p. 22).

USB MODE

Specifies the USB operating mode (p. 27).

MIDI

Parameter

Value

Explanation

Rx CHANNEL

Ch.1–16, OFF

Specifies the receive channel.
If this is “OFF,” MIDI messages are not received.

Tx CHANNEL

Ch.1–16, Rx, OFF

Specifies the transmit channel.
If this is “OFF,” MIDI messages are not transmitted.

PC IN

OFF, ON

Specifies whether program changes are received.

PC OUT

OFF, ON

Specifies whether program changes are transmitted.

BANK SEL OUT

MSB, M+L

Specifies the bank select message that is transmitted simultaneously with the 

program change.
If you select MSB, only MSB (CC#0) is transmitted. If you select M+L, both MSB 

and LSB (CC#32) are transmitted.

CC IN

OFF, ON

Specifies whether control changes are received.

CC OUT

OFF, ON

Specifies whether control changes are transmitted.

Summary of Contents for MD500































Reviews:

No comments

Brands by name

Popular brands

Load more brands