24
Inserting an External Effect Unit
You can connect an external effect unit between the OUTPUT A jack and INPUT B jack, and use it in conjunction with the MD-500’s effect
(insert loop function).
You can also change the connection order of the effects.
AMP
Guitar
INPUT
OUTPUT
MD-500
Guitar
AMP
[MODE]
CHORUS
(Example)
Setting the Insert Loop Function
Turning the insert loop function on
1
Press the [EDIT] button.
2
Use the [
H
] [
I
] buttons to select “SYSTEM,” and then press the
[EDIT] button.
3
Use the [
H
] [
I
] buttons to select “INSERT LOOP,” and use the
[RATE/VALUE] knob to turn the setting “ON.”
4
Press the [EXIT] button to return to the top screen.
Specifying the connection position of the external effect unit
1
Press the [EDIT] button.
2
Use the [
H
] [
I
] buttons to select “PATCH,” and then press the
[EDIT] button.
3
Use the [
H
] [
I
] buttons to select “INSERT SW,” and use the [RATE/
VALUE] knob to edit the value.
Value
Explanation
PRE
Connect before the MD-500's effect.
POST
Connect after the MD-500's effect.
4
Press the [EXIT] button to return to the top screen.
* Save the edited patch as described in “Saving a Patch” (p. 9).
MEMO
You can also use the insert loop function in simul mode (p. 23).
