manualshive.com logo in svg

Boss DD-500, Owner'S Manual, Page: 13 / 26

Share
Download
Boss DD-500 Owner'S Manual Download Page 13

13

Parameter List

MODE: TERA ECHO

Parameter

Explanation

RESONANCE

This adjusts the amount of resonance (and the tone coloration) of the effect sound.

MODE: SLOW ATTACK

Parameter

Explanation

SENS

Adjusts the sensitivity of the slow gear.
When it is set to a lower value, the effect of the slow gear can be obtained only with a stronger picking, while 

no effect is obtained with a weaker picking. When the value is set higher, the effect is obtained even with a 

weak picking.

RISE TIME

Adjusts the time needed for the volume to reach its maximum from the moment you begin picking.

MODE: FILTER

Parameter

Explanation

LFO TYPE

Selects the curve at which the filter is moved.

LFO RATE

Adjusts the rate at which the filter is moved.

LFO DEPTH

Adjusts the range over which the filter is moved.

TYPE

Selects the type of filter (LPF/BPF/HPF). 

CUTOFF

Adjusts the frequency at which the filter operates. Higher values raise the frequency.

RESONANCE

Adjusts the operation of the filter. Higher values produce a stronger tonal character.

FILTER POS

Specifies whether the filter is placed before or after the delay.

MODE: SHIMMER

Parameter

Explanation

PITCH SHIFT

Specifies the amount of pitch shift in semitone units.

PITCH FINE

Specifies a fine adjustment to the amount of pitch shift. A change of 100 in the Fine setting corresponds 

to a change of 1 in the Pitch Shift setting.

PITCH BAL

Adjusts the balance between the pitch-shifted sound that is input to the delay and the direct sound.

DIRECT FB

Adjusts the amount of feedback for the delay that is applied to the direct sound. This is specified as a 

proportion (%) relative to the feedback specified by the [FEEDBACK] knob.

MODE: SFX

Parameter

Explanation

BIT DEPTH

Specifies the bit depth.

SAMPLE RATE

Specifies the sampling rate.

LoFi  BAL

Adjusts the volume balance between the direct sound and the effect sound.

TR WAVE

Adjusts changes in volume level. A higher value will steepen wave’s shape.

TR RATE

Adjusts the frequency (speed) of the change.

TR DEPTH

Adjusts the depth of the effect.

MODE: PATTERN

Parameter

Explanation

PATTERN

Selects the delay pattern.
You can choose from preset patterns PAT1–PAT10 and the USER pattern which you are free to set.

DELAY 1–16 TIME 

Adjusts the proportion relative to the Delay 1–16 delay time when PATTERN is set to “USER.”

DELAY 1–16 LEVEL 

Adjusts the Delay 1–16 volume when PATTERN is set to “USER.”

DELAY 1–16 PAN

Adjusts the Delay 1–16 stereo position when PATTERN is set to “USER.”

Summary of Contents for DD-500



























Reviews:

No comments