2
Explanation of Symbols on the Machine
For safe operation and maintenance, symbols are carved in relief
on the machine.
According to these indications. please be careful not to make any
mistake.
The port to refuel "MIX GASOLINE"
Position
: Fuel cap
The port to top up chain oil
Position
: Oil cap
Setting the switch to the 'O' position, the engine stops
immediately.
Position
: Front at the top of the rear handle.
Starting the engine If you pull out the choke knob (at the back
right of the rear handle) to the point of the arrow. you can set the
starting mode
as follows:
First-stage position-starting mode when the engine is warm.
Second-stage position-starting mode when the engine is cold.
Position
:
Upper-right of the air cleaner cover
The screw under the 'H' stamp is The High-speed adjustment
screw.
The screw under the 'L' stamp is The Slow-speed adjustment
screw.
The screw at the left of the 'T' stamp is the Idle adjustment screw.
Position
: Left side of the rear handle
Shows the directions that the chain brake is released (white
arrow) and activated (black arrow)
Position:
Front of the chain cover
if you turn the rod by screwdriver follow the arrow to the
"MAX"
position,the chain oil flow more. and if you turn to the "MIN"
Position:
Bottom of the power unit
