6. Sawing
Before proceeding to your job,read the section 'For Safe Operation'.
it is recommended to first practice sawing easy logs. This also
helps you get
accustomed to your unit.
Always follow
the safety regulations. The chain saw must only be
used for cutting wood.It is forbidden to cut other types of material.
Vibrations and kickback vary with different materials and the
requirements of the safety regulations would not be respected. Do
not use the chain saw as a lever for lifting. moving or splitting
objects. Do not lock it over fixed stands. It is forbidden to hitch tools
or applications to
the PTO other than those specified by the manufacturer.
It is not necessary to force the saw into the cut. Apply only light
pressure while running the engine at full throttle.
When the saw chain is caught in the cut. Do not attempt to pull it out
by force, but use a wedge or a lever to open the way.
GUARD AGAINST KICKBACK
This saw is equipped with a chain brake that will stop the chain in
the event of kick-
back if operating properly. You must check the chain brake
operation before each usage by running the saw at full the Throttle
for l-2 seconds and pushing the front hand guard toward. The chain
should stop immediately with the engine at full speed. if the chain is
slow to stop or does not stop. replace the brake band and clutch
drum before use.
It is extremely important
that the chain brake be checked for
proper operation before each use and that the chain be sharp in
order to maintain the kickback safety level of this saw. Removal of
the safety devices. Inadequate maintenance. or incorrect
replacement of the bar or chain may increase the risk of serious
personal injury due to kickback.
