Boss 745BA, User Manual, Page: 7 / 10

13 6
7. LOC BUTTON
1. To load/unload disc
2. To load/unload USB storage
NOTE
3. To select next or previous track to play
4. To select next or previous 10 track to play for USB or MP3/WMA
5. To play fast forward or backward
6. How to use the PLAY/PAUSE/TOP button
A) In FM mode, when the signal of the distance radio station are very weak and
the receiving effect is bad during tuning, check whether there is the word LOC
on LCD. If there is the word LOC on LCD, press this button to turn off the LOC
function, then tune again for the distance radio station;
B) In FM mode, when the signal of the local radio station are too strong to lead
that the interference to the receiving effect during tuning, press this button to
turn on the LOC function to display the word LOC on LCD, then tune again
for the local radio station.
Press the REL button to flip down the front panel and then insert the disc
into the disc compartment or press the EJ button to eject the disc from the
disc compartment.
Insert the USB storage into USB socket, then the playing mode will be changed into
USB mode and display USB on LCD, and then play the first track of USB.
: Always remember to switch off the unit s power or switch to other mode then
remove out the USB Stick. Never try removing the USB Stick while playing music file
on the USB stick. It may damage the USB stick and sometimes will caused the unit
system lock up.
Under USB or DISC mode, press the >>| button to select next track to play.
Press the |<< button within 1 seconds after selecting a track to select the
previous track to play. Press the |<< button 1 seconds later after selecting a
track to select the current track and play from the beginning of the current track.
Under USB or MP3 mode, short press M6 or M5 button to select next or
previous 10 TRACK during normal play.
Under USB or DISC mode, during playback, press the >>|/|<< button and hold
to skip forward or backward.
Under USB or DISC mode, during playback, press TOP button to pause USB or Disc
playback, press TOP button again to resume USB or Disc playback. Press TOP button
long to play the first track of the USB or Disc.
USB or DISC OPERATION:
’
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL SUPPORT STRAP
To boost up the capability of anti-jamming,
please make sure fix tightly the support
strap into the metal joint that connect to the
chassis of the car.
metal
To properly fix the meal mounting
sleeve, bend the tabs of the sleeve
against the DASHBOARD with
a screwdriver.
METAL MOUNTING SLEEVE
DASHBOARD
FRONT PANEL
PLASTIC TRIM RING
UNIT CHASSIS
NOTE
To attach the removable faceplate back to
the unit chassis, firstly join the left guide
block hole to the left cylinder, then join the
right guide block hole and the right
cylinder, finally flip the front panel up to
combine with chassis.
Before mounting and operating
the CD player, remove the metal
mounting sleeve illustrated by the
arrows.
Remove the two screws that
fix the CD deck mechanism
player during transportation
before mounting the player.
RESET BUTTON
Push this reset button with a cuspidal
object to renovate the distorted program
once the program is distorted.
To remove the front panel,
after flipping down the front
panel, push it rightwards
firstly, then draw the left of
the front panel outwards.
EJECT (EJ) BUTTON
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the chassis
out of the metal mounting sleeve as shown in the right
illustration.
Before inserting or ejecting disc, press
the REL button to flip down the faceplate.