5
14
Under RADIO mode, press the BAND button shortly and repeatedly to select
your desired radio band in sequence and circulation as follows:
-->FM1-->FM2-->FM3-->AM1-->AM2-->
.
Under RADIO mode, short press the >>| or |<< button repeatedly to manually tune
up or down for the desired radio station step by step. Long press the >>|/ |<< button
to automatically tune up or down for the radio station of strong signal.
Under RADIO mode:
A) Press one of 1-6 number buttons hold for more than 1 second until the second
beep output to store the current station in the preset memory bank of the number
button for the current band. So the unit can store 30 preset stations.
B) Press one of 1-6 number buttons shortly to turn on the preset station stored in
the preset memory bank of the number button for the current band.
A) Long press the AS/PS button, it will search from the current frequency and check the
signal strength until 1 cycle search is finished on current band, and then 6 strongest
stations will be preset to the corresponding preset memory banks of the 6 number
buttons. When the auto-storage operation is completed, it will turn on the preset
station stored in the memory bank of the 1 button.
B) Short press the AS/PS button to scan for each preset station for the current band.
When the field strength level is more than the threshold level of stop level, the radio
is holding at that preset station for 5 seconds with releasing mute, while memory
digital and frequency will flash on LCD, and then scan again.
In FM band, FM1, FM2 and FM3 is checked one at a time.
Press SCAN button to scan up by one channel step with station detection. If a
valid signal has detected, the current frequency is blinked within 5 seconds, then
press it again to stop scan and remain the current frequency; otherwise, the unit
continue to scan up by one channel step with station detection 5 seconds later.
In FM mode, press the MO/ST button to select the STEREO or MONO sound mode.
RADIO OPERATION:
1. To select radio band
2. To select the radio station manually or automatically
3. To store the current station or turn on the preset station
4. To automatically store for the strongest stations and scan for each stored stations
Under RADIO mode:
5. To scan for strong signal of radio station
6. STEREO/MONO BUTTON
CARE FOR USING CD'S:
1. To keep the disc clean:
Before playing a disc, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc outwards from the disc center.
2. When one has already been inserted. Doing so may damage the unit
Do not attach any sticker or adhesive tape on the disc.
. Inset a disc
with labeled surface up, or it will damage the unit.
3.
sources such as heating vents,
caliduct
Do not leave disc in a car if it is parked in direct sunlight as that will lead to a
considerable rise in the temperature inside the car.
4. Do not use any secondhand or rented disc, usually, there is glue on the surface of
those discs, it will stop the unit working and damage it.
7.
Handle the disc by its edge to keep the disc clean and do not touch the surface.
Do not expose the disc to direct sunlight or nearby heat
which can cause the disc to warp.
5. Always store the disc in its case for protection. Scratched up discs will produce poor
sound performance and cause CD player to skip.
6. In raining day or wet area, the moisture may form on the disc or the optical parts, The
playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the unit, allow the unit to sit for about one hour
with power on.
Do not use solvents such as benzine or thinners. Commercially available cleaners or
anti-static spray will damage the unit.
About CD-R/CD-R/W discs:
In addition to commercially-recorded audio CD's, this unit can play CD-R and
CD-R/W discs. In come cases, particularly when recorded on older CD burners,
some CD-R and CD-R/W discs may not play. Also, whenever you are recording
a CD for playback in this receiver, it is recommended that you record at 24x or
slower speed for CD-R and 4x or slower for CD-R/W to achieve higher signal
quality and better playback performance.
Summary of Contents for 745BA
Page 1: ......