Boss Solar Strip Thermal Solar Pool Heating | INSTALLATION MANUAL
6
Revision:
C
Revision Date:
18/11/2021
STEP 2:
Starting at the top of the manifold system on the
FLOW pipe, work out the position of the first collector run.
Mark the position of the first Tufman 10-1 manifold.
Using the supplied counterbore tool in your kit, drill a hole.
Ensure the hole is clean and free of swarm and burrs.
STEP 3:
Using the supplied silicone lubricant, lubricate the
10-1 Manifold grommet.
*Be wary of overspray, slip hazard*
Push the grommet into the drilled hole until it is seated and
locked into position.
STEP 4:
Push the Tufman 10-1 manifold into the grommet
until it is firmly seated.
Loop one of the supplied cable ties through 2 holes and
secure around the PVC pipe, tighten until firm.
All holes should be drilled along a neat, straight line.
You may wish to draw a line on the pipe before drilling
Summary of Contents for PROSOLAR
Page 1: ......
