g322158
Figure 11
1.
Bolt (5/8 inch)
3.
Nut (5/8 inch)
2.
Push frame
3.
Torque all 4 bolts to 153 N∙m (113 ft-lb).
Note:
Do not overtighten the fasteners; ensure
that the push frame can pivot freely.
4.
Hook the 2 trip springs through the holes on the
push frame (
g316202
Figure 12
1.
Washer (1/2 inch)
3.
Eyebolt
2.
Nylon locknut (1/2 inch)
4.
Trip spring
5.
Hook the other ends of the trip springs to 2
eyebolts (
).
6.
Insert the threaded end of the eyebolts through
the holes on the plow blade and secure them
using 2 washers (1/2 inch) and nylon locknuts
(
).
7.
Tighten the nylon locknuts until there is a gap of
0.8 mm (1/32 inch) between the trip spring coils.
Installing the Hydraulic
Hoses
Install the hoses to the manifold as shown in
g317030
Figure 13
8
