Boss Snowplow MSC23000, Owner'S Manual, Page: 5 / 12

Setup
Note:
Determine the left and right sides of the
machine from the normal operating position.
Installing the Push Frame
1. Loosely secure the 2 mounting brackets to the
plow using 2 bolts (5/8 inch) and nuts (
Figure 3 ).
g297803
Figure 3
1. Bolt (5/8 inch) 3. Nut (5/8 inch)
2. Mounting bracket
2. Loosely secure the push frame to the plow and
mounting brackets using 2 bolts (5/8 inch) and
nuts (
Figure 4 ).
g297804
Figure 4
1. Bolt (5/8 inch) 3. Nut (5/8 inch)
2. Push frame
3. Torque all 4 bolts to 153 N∙m (113 ft-lb).
Note:
Do not overtighten the fasteners; ensure
that the push frame can pivot freely.
4. Hook the 2 trip springs through the holes on the
push frame (
Figure 5 ).
g297805
Figure 5
1. Washer (1/2 inch) 3. Eyebolt
2. Nylon locknut (1/2 inch) 4. Trip spring
5. Hook the other ends of the trip springs to 2
eyebolts (
Figure 5 ).
6. Insert the threaded end of the eyebolts through
the holes on the plow blade and secure them
5