BM008-V1
5
3.2.Check for leaks or other
abnormal conditions. If any
abnormality occures during
testing please contact Boss
Hydraulics.
3.3.Clean after use and remove any
contamination.
4. Check the oil levels and
replenish whenever required. If
any of the following conditions
occur, replace it immediately:
4.1.When the oil becomes
contaminated.
4.2.When the smell of the oil
changes.
4.3.When water enters the reservoir.
WARNING:
If oil splashes into your
eyes, rinse immediately with
water for at least 15 minutes. If
the oil splashes on your skin,
wash it with water and soap.
1. MAINTENANCE CHECK (CONT)
5. Replacing hydraulic oil
5.1.Loosen the oil filter port of the oil
reservoir.
5.2.Remove the drain plug/ screw
at the front of the oil reservoir to
drain the oil.
5.3.Clean the oil filter and reservoir.
5.4.Install the drain plug/ screw and
fill the oil reservoir with new
recommended oil but do not
overfill above indicated line.