BM008-V1
2
WARNING:
• When using the electric pump,
stand clear of the hydraulic
oil outlet to prevent possible
personal injury or property
damage. The electric pump
must be kept away from any fire
source.
• Before starting, the hose or
couplings should be fully
connected, to prevent the high-
pressure hydraulic oil causing
personal injury.
• The maximum working pressure
of the hydraulic electric pump
is 700 Bar. Never adjust the
pressure beyond the set
pressure.
• Before connecting the power to
the pump ensure the power is
turned off at the main switch.
• Do not modify the electric pump;
if you require modifications
please consult Boss Hydraulics
for authorised consent. Without
the written consent from Boss
Hydraulics, any modifications are
not covered by warranty.
•
Do not overfill the hydraulic tank
.
If the tank is overfilled there is a
risk of overpressurisation.
• The wrench and the hydraulic
pump are connected by a
twin line hydraulic hose with a
working pressure of 700 bar.
Each hose has both male and
female connectors at both ends
to ensure proper connection
between the pump and the
wrench.
• In circumstances where ultra
high pressure is used incorrectly,
hydraulic oil may be ejected.
In this case hydraulic oil may
penetrate your hand, causing
serious injury. If so go straight to
the hospital.
• If the hydraulic oil is sprayed into
your eyes, immediately rinse with
water for about 15 minutes, and
then go to the hospital.
