Page 6
Page 9
Remote Control Unit
1
2
5
6
7
3
4
1. POWER
Use to turn the unit on or off.
2. MODE
Press to choose desired audio source:
RADIO > Disc Playback > AUX > USB >
Press and hold to choose Frequency
Area: MID EAST > AMERICA3 >
AMERICA2 > AMRICA1 >
JAPAN > RUSSIA > AUST >
EUROPE >
3. BAND
Press briefly, repeatedly to select
between the radio bands:
FM1 > FM2 > FM3 > AM1 > AM2>
Press and hold it to activated RESET
SYS mode, then press button 1 to confirm
clear all the stored memories.
4. SCAN/EON ON/OFF
In Radio Mode, when you press this button briefly the tuner will scan up the band
until it detects a strong station. Then it will stop, and the frequency of that station
will be displayed in a flashing pattern for about 5 seconds. If you wish to hear this
station, press SCAN again. If you do not press SCAN, it will scan up to the next
station and repeat the same pattern.
Press and hold this button to activated EON function. Press again to cancel it.
5. TUNE/TRACK
6. PLAY/PAUSE AND MUTE BUTTON
During
7. VOLUME
Radio or AUX mode:
Press this button to silence the audio. Press again to restore the previous audio
volume level.
During Disc Playback or USB mode:
Press briefly to pause playback. Press again to resume normal playback.
Press and hold this button to silence the audio. Press again to restore the previous
audio volume level.
8.
NOTE: This unit is compatible with the radio frequency remote
MRF90 (sold seperately). Using radio frequency, you do not
have to be in direct sight with the unit for it to read remote
commands.
MUSIC ALBUM ART IS T
DI SC IN
MP3
S TEREO
TRK
CH
LOC
TP
AF
TA
PTY
ES P
EO N
s u bw
EQ
EO N
1. To keep the disc clean:
Before playing a disc, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc outwards from the disc centre.
2. When one has already been inserted. Doing so may damage the unit
Do not attach any sticker or adhesive tape on the disc.
Handle the disc by its edge to keep the disc clean and do not touch the surface.
. Insert a disc
with labelled surface up, or it will damage the unit.
3. Do not expose the disc to direct sunlight or nearby heat sources such as heating vents,
caliduct which can cause the disc to warp.
Do not leave disc in a car if it is parked in direct sunlight as that will lead to a considerable
rise in the temperature inside the car.
4. Do not use any secondhand or rented disc, usually, there is glue on the surface of those
discs, it will stop the unit working and damage it.
5. Always store the disc in its case for protection. Scratched up discs will produce poor sound
performance and cause CD player to skip.
6. In raining day or wet area, the moisture may form on the disc or the optical parts, the
playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the unit, allow the unit to sit for about one hour
with power on.
7. Do not use solvents such as benzine or thinners. Commercially available cleaners or
anti-static spray will damage the unit.
About CD-R/CD-R/W discs:
In addition to commercially-recorded audio CD's, this unit can play CD-R and CD-R/W
discs. In come cases, particularly when recorded on older CD burners, some CD-R
and CD-R/W discs may not play. Also, whenever you are recording a CD for playback
in this receiver, it is recommended that you record at 24x or slower speed for CD-R
and 4x or slower for CD-R/W to achieve higher signal quality and better playback
performance.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
Summary of Contents for MR1630UA
Page 1: ......
