Page 1
When the unit is powered off, it will switch on by pressing any button except the EJECT
and RELEASE button. When the unit is ON, Press and hold POWER button to turn it off.
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
When selecting a desired audio mode, press the VOL+ ( )VOL-( ) button to adjust the
audio effect.
In each mode, the waiting time is about 5 seconds, and when the waiting time is over,
it returns to the last display mode.
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN) 01,..................46,(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
b) Press SEL button and hold for about 5 seconds to turn on TA SEEK/TA ALARM
mode, then press SEL button briefly and repeatedly to select PI SOUND/PI MUTE,
RETUNE L/RETUNE S, MASK DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET
(FLAT/CLASSIC/ROCK/POP), SUBW ON/SUBW OFF, VOL LAST/VOL DEFA ,
STEREO/ MONO (in RADIO mode), LOUD OFF/LOUD ON, DX/LOCAL (in RADIO
mode), CLK 12/24 mode. After selecting the desired mode, press the VOL + ( ) or
VOL- ( ) button to select one setup item of the desired mode.
1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5
seconds, the radio retunes to next station which has a different PI to the last station,
1. POWER BUTTON
2&3&4. SEL BUTTON (Select) AND VOL CONTROL BUTTON
LOCATION AND FUNCTION OF CONTROLS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
25
24
23
26
27
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
Summary of Contents for MR1630UA
Page 1: ......
