12
AUX
You can play audio from a playback device (e.g. CD/DVD player or VCR).
1.
Using an audio cable with RCA plugs (not included), connect a playback device with
RCA audio outputs to the RCA audio inputs marked “AUX INPUT” on the unit.
2.
Switch the unit to AUX IN mode.
a.
Press
MODE
to access the mode options.
b.
When the options bar is displayed, rotate the function knob to select “AUX IN” and
press the function knob or
SEL
to confirm.
3.
Start playback on the connected device and audio will play through the unit.
-
For best sound performance, set the volume of the connected device to maximum.
-
NOTE: If there is distortion heard, you may need to turn the volume of the connected
device down a level or two.
Output Audio
You can output audio from the unit to an external amplifier or powered speakers.
1.
Using audio cables with RCA plugs (not included), connect the RCA audio outputs
marked “FRONT OUTPUT”, “REAR OUTPUT” and “SUB OUTPUT” on the unit to the
corresponding RCA audio inputs on an amplifier or powered speakers.
2.
Start playback on the unit and audio will be output to the connected device.
Accessory Power Control
The unit comes with an accessory power switch which can turn on or off a connected
accessory (not included, e.g. a light bar or LED whip).
1.
Connect the red/purple wire (marked “AUX POWER”) from the unit to an accessory.
2.
When the unit is powered on, press and hold on the control panel to turn on or off
the connected accessory.
- When accessory power is on, the
icon is displayed in the top right corner of the
screen.
Summary of Contents for MGV500B
Page 19: ......
