background image

- 2 -

Features

This product features the following:
•  Voltage meter with 3-digit blue LED display
•  Voltage measurement accurate to +/- 0.1VDC
•  Blue illuminated window with light following playing music
•  Automatic sleep status when volume is low or there is no voltage variation present
•  Audible warning tones for the followings: 1) reverse polarity connection, 2) low battery voltage, 

and 3) voltage overload.

Important

Read and understand all instructions before you use your product. If you do not follow the instructions 

in this manual, we are not responsible for any resulting personal injury or damage to property. This 

will also void the warranty.

Important Safety Precautions

•  Do not open or attempt to repair this product yourself. Dangerous high voltages are present which may 

result in electric shock.

•  To avoid risk of electronic shock or damage to the product, do not permit the product to become damp or 

wet from water or other liquids. If this does occur, immediately unplug the power wires and send the product 

to your local dealer or service center as soon as possible.

•  In the event of smoke, strange noise or odor emitted from the product or any other abnormal operational 

signs appearing on the product, disconnect the product from the power supply. Discontinue use and contact 

your dealer or our technical support. Using the product in this condition may result in permanent damage 

to the system.

•  Servicing must only be carried out by a technician. Contact our technical support for any service question.

Installation Precautions

•  WARNING: Always consult a professional installer.

•  Installation must be performed by a professional. Contact our technical support for any installation question.
• 

Always wire the product to the power source (battery) through a fuse to prevent a short circuit and fire.

•  Before installation, disconnect the negative terminal of the vehicle battery to prevent damage to the product, 

fire, and/or possible injury.

•  Never operate the product when it is not mounted. Make sure the product is securely mounted and all the 

cables are securely connected to prevent  damage, especially in an accident.

•  Observe the safety and operating instructions of the devices which are connected to the product. 

•  Do not 

use any aggressive cleaning agents. Clean the product with a dry, fiber-free cloth.

Environmental Care

Do not throw away the product with normal household waste at the end of its life. Follow your local laws when  

disposing of electronic products. By doing this, you help preserve the environment.

Summary of Contents for CAP18













Reviews: