background image

 Satellite receiver

3.

Navigation system can keep receiving eight satellite signals. As a 
general rule, the navigation system can figure out your accurate 
location after received 3 4 satellite signals. But sometimes, weather 
and tall buildings in the city shall affect the signal receiving effect, 
as is shown in following figure:

In tune    

Among tall buildings

At the boulevard      The antenna is sheltered Underground parking    Overpass or viaduct

GPS Navigation Function Operation 

1. Navigation Function Operation

Touch

【   】

icon in main menu can enter below interface.

For detailed operation of navigation function, see “Navigation Operation Manual”.

2. Receiving signal error

When the satellite signals can be normally received, the error of standard GPS shall be about 7 meters, 
Driving on parallel sections,there shall be error even the product has auto correct function. The 
normal receiving of satellite signals shall be affected and cause error in following environment. 

Other Functions 
Rearview function

In any running state, the video signal can switch to reverse video state when reversing the car, and 
the system shall return to its initial running state after reversing the car.

          Analog on-site backup                       

 Backup rearview

     

Warn:

Do not rely on CCD system completely, please make sure your car is safe by your eyes during driving. 
Back rearview system only assists in driving. As the distance range of rearview system is limited, 
completely relying on the rearview system during driving may cause accidents.

10

External input operation

Connect the video input plug with external video input jack, and connect the audio input plug with 
external audio input jack. 
Touch

【    】

icon on main interface to access external input interface. 

Also can insert SD card in the slot, and choose SD's 
picture as wallpaper)

Wallpaper

In setting menu/main menu, touch wallpaper icon can enter 
wallpaper setting interface.
You can choose the wallpaper you like: up and down sliding 
can scan wallpapers, confirm and touch 

【   】

icon can finish 

setting.

09

Summary of Contents for BV9382NV









Reviews: