Boss Audio Systems BV7970, User Manual

Page: 22 / 50

21
14. TUNER OPERATION
19) BAND BUTTON (BAND)
Press BAND to change between FM bands and AM(MW) bands.
Preset Scan
STEREO
Scan stations stored in the current band. Select a band (if needed). Press AS/PS button for less
than 3 seconds. The unit will pause for ten seconds at each preset station. Press AS/PS button
again to stop scanning when the desired station is reached.
The unit will automatically pick up a stereo signal when available. When in stereo mode, the ST
icon appears in the display. When no stereo signal is available, the unit will automatically revert
to mono operation, and no icon will be displayed.
Manual Tuning
Press the Up Tuning( ) or Down Tuning ( )button for more than 3 seconds to move the
radio frequency number up or down by one step.
Auto Seek Tuning
Press the Up Tuning ( )or Down Tuning ( )button for less than 3 seconds to move to
next station automatically.
20&21) TUNING UP/DOWN BUTTON ( / )
12~17) PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band.
11) AUTOMATICALLY STORE / PRESET SCAN (AS/PS)
Automatically select 6 strong stations and store them in the current band. Select a band
(If needed). Press AS/PS button for more than three seconds. The new stations replace
stations already stored in that band.
IMPORTANT NOTE ON THE EUROPEAN / RDS TUNER SETTING
This unit the “Tuner Area” setting is default at “U.S.A” frequency. If user is using this unit in
European or ORIT Area with RDS radio System. Please go to the “Menu - Tuner Set” and
change Tuner setting to “Europe” or “ORIT”. Once selected “Europe” or “ORIT” tuner
setting, the radio system will change from U.S.A to European RDS or ORIT RDS System.
1) For details operation of the Menu-Tuner Setting, please refer to page “Menu
operation”.
2) For details operaion of the RDS system, please refer to page “RDS Operation”.