background image

23

23

8

1.7  Description of the Rear Cabinet

Connecting the parking brake line to the parking brake system built in the car

Parking brake

Parking brake switch
(inside the car)

To metallic body or chassis of the car

Note:1. Parking wire must be connected, and the parking brake must be engaged in order for the monitor to work
          2. Use the clip end of the Ground wire provided by manufacturer to connect Mounting Screw, use the other end of the 
              Ground wire to connect the negative pole of the power source. Otherwise, the video on screen may have interference

.

Parking brake wires(Green)

Rear View Camera

 In any mode, the video signal will switch to camera mode (if applicable)when car is in reverse.
 After taking the car out of reverse, it will resume to its previous mode.

Analog on-site backup

Analog on-site backup

P I C

A N G L E

Warning:
Always check the surrounding environment. Objects might be reversed. The rear view
camera is  designed only to assist while reversing. Due to the limitations of the camera
angle and range, it may cause accidents if the driver relies solely on the reverse camera
and display.

             

.  

2. Select the RATING item and then press the > button to enter it, then use the 
    direction buttons to select your desired rating level, then press the OK button
    to confirm.
3. Select the PASSWORD item again and then press the > button to enter it, then 
    input the password, and then press the OK button to lock the new setting of 
    the rating level of the Parental Control. 

DEFAULT 

This item is for making all setup items change back to original status. 

4.24.2  LANGUAGE SETUP

   

             

OSD LANGUAGE  

This item is for selecting the language of the SYSTEM MENU and all operating
prompt interface displayed during playback.  

AUDIO LANG 

This item is for selecting a audio language.  

SUBTITLE LANG

This item is for selecting a subtitle language. 

MENU LANG

This item is for selecting a disc menu language.

4.24.3  AUDIO SETUP 

   

  
            

AUDIO OUT

there is only ANALOG mode, i.e. SPDIF/OFF, not optional.

KEY 

It is for selecting your desired basic music tone(from low to high).  

Summary of Contents for BV7336

















Reviews: