Boss Audio Systems BV7332B User Manual Download Page 20 | Manualshive

Page: 20 / 21

background image

19

Troubleshooting Guide

Specifications

The stereo indicator is blinking

PROBLEM

No Power

Errors are displayed on the screen
or no function is active

No radio reception

CDs cannot be loaded

CAUSE/SOLUTION

Check and make sure that the fuses did
not blow.

Unplug your car radio then plug it again

Check the connection of the antenna.
Make sure the antenna is completely
extended and that it is not broken

A CD is already inside the appliance.
Make sure that the fixing screws of the
CD mechanism have been removed.

Set the frequency more accurately.
The reception signal is too low.

GENERAL

Operating Power......................................................12 Volts DC, Negative Ground
Speaker output.......................................................................................4 speakers
Front Pre-amp Output..........................................................................................1v
Output Impedance............................................................................... 4 to 8 Ohms
Fuses................................................................................................................10 A
Dimensions....................................................178mm(W) x 178mm(D) x 51mm (H)
Weight............................................................................................................2.0 Kg

CD PLAYER

Signal / Noise Ratio.......................................................................................>80dB
Frequency Response.........................................................................20 Hz~20KHz
Channel Separation.......................................................................................>50dB
D / A Converter................................................................................................16 Bit

FM TUNER

Tuning Range.......................(USA) - 87.5 - 107.9MHz, (Europe) - 87.5 - 108 MHz
FM Sensitivity.................................................................................................12dBu
Stereo Separation @ 1 Khz.............................................................................35dB

AM TUNER

Tuning Range..........................(USA) -- 530-1710 KHz, (Europe) -- 522-1620 KHz
AM Sensitivity.............................................................................................30dBu

«
...
18
19
20
21
»

Summary of Contents for BV7332B






















Reviews:

No comments

Related manuals for BV7332B

Brand: Magnat Audio Pages: 64

Brand: OEM Pages: 2

Brand: X10 Pages: 1

Brand: Yamaha Pages: 57

Brand: Yamaha Pages: 4

Brand: Yamaha Pages: 60

Brand: Voscom Pages: 15

Brand: Insignia Pages: 2

Brand: Lafayette Pages: 30

Brand: Dish Network Pages: 26

Brand: Optimus Pages: 40

Brand: Integra Pages: 48

Brand: Rocstor Pages: 2

Premier Elite 32XPH-W

Brand: Texecom Pages: 20

Brand: Elvaco Pages: 2

Brand: D+M Group Pages: 22

Nolan NSRXRM3C2XXX

Brand: PMR Pages: 2

Brand: Seaside Communications Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands