8
Basic Operation
1. Turning the unit On / Off
When the unit is off, press the Power Button once to turn the unit on. When the unit is on,
press Power Button once to turn TFT off. During TFT off, the video out signal will be avail-
able so that the connected monitor will show the screen of the unit. Press the Power Button
again to turn the TFT back on. Press and hold the Power button again to turn the unit off.
2. Mode Selection
Press the SRC Button to cycle Play Mode between RADIO, USB, SD, BT, AUX and AV IN.
3. Sound Control
A. Volume
Use the VOL +/- Knob to adjust the volume level. Turn the button clockwise to increase
the volume, and vice versa. The larger the number of volume, the higher the volume level.
B. Bass
Press the SEL Button repeatly until the display shows “BAS”. Use the VOL +/- Knob to ad-
just. When EQ is ON, bass control is not available.
C. Treble
Press the SEL Button repeatly until the display shows “TRE”. Use the VOL +/- Knob to ad-
just. When EQ is ON, treble control is not available.
D. Balance
Press the SEL Button repeatly until the display shows “BAL”, then use the VOL +/- Knob to
adjust the balance between the left & right speakers.
E. Fader
Press the SEL Button repeatly until the display shows “FAD”, then use the VOL +/- Knob to
adjust the balance between the front & rear speakers.
F. Preset Equaliser Function
Press the SEL Button repeatly until the display shows “EQ OFF”, then use the VOL +/- Knob
to choose the equaliser sound effects. The Sequence of equaliser setting will be EQ OFF-
CLASS-ROCK-POP.
G. Loudness
Press the SEL Button repeatly until the display shows “LOUD OFF”, then use the VOL +/-
Knob to turn loudness on. The mark “LOUD ON” will be shown on the display.
H. SUB
Press the SEL Button repeatly until the display shows “SUB OFF”, then use the VOL +/-
Knob to turn SUB on. The mark “SUB ON” will be shown on the display.
I. ST
Press the SEL Button repeatly until the display shows “ST ON”, then use the VOL +/- Knob
to turn the ST effect off. The mark “ST OFF” will be shown on the display.
J. Beep On/off
Press the SEL Button repeatly until the display shows “BEEP ON”, then use the VOL +/- But-
ton to turn the beep sound off. The word “BEEP OFF” will be shown on the display.
4. Mute Control
Press the MUT Button to activate the Mute function. Press MUT Button again or use the
VOL +/ - Button to cancel.
5. HOME Button
In Radio, BT, AV IN and Aux modes, press the HOME button to go back to the home screen.
You can select different play modes by turning and pressing the volume knob. Also you can
enter the setup menu in the home screen.
In USB and SD modes, during music or video playback, press the HOME button once to go
back to the directory page, in which you can choose the desired file by pressing and turning
the volume knob. Press again the HOME button to go back to the home screen.
6. SETUP
Enter the setup menu in the home screen by turning and pressing the volume knob. Turn the
volume knob to each item you would like to set. Press the volume knob in each of the item to
select, followed by turning the volume knob to adjust settings. After adjusting, press the vol-
ume knob again to confirm. Repeat these steps to finish the setting of other items. You can
adjust language, date, time, backlight, factory default, time mode and radio area accordingly.
7. Clock
Press the clock button on the remote control to see the time during USB and SD modes. The
clock always shows itself during radio BT, AV IN and Aux modes.