Boss Audio Systems BV7280 User Manual Download Page 12

11

Settings

Press the Home button   to enter main interface. Use the volme knob to select 

the setting. You can see the following options. Rotate the volume to choose 

each option.

1. Language

Press the volume knob to access the Language setting. There are 3 options 

for you to choose. English, Deutsch and Portgues. Rotate the volume knob to 

select your option and followed by pressing it to confirm setting. The Factory 

default Language is Englis.

2. Date

Press the volume knob to access the Date setting. There are 3 items for Date 

setting, date-month-year. Press volume konb to access each item and rotate it 

to set. Press the volume knob again to confirm and exit the item.

3. Time

Press the volume knob to access the Time setting. There are 2 items for Time 

setting, minute-hour. Press volume konb to access each item and rotate it to set. 

Press the volume knob again to confirm and exit the item.

4. Backlight

Press the volume knob to access the Backlight setting. The setting range from 

1 to 5. Rotate the volume knob to set and press it again to confirm and exit the 

Backlight setting.

5. Factory default

Press the volume knob to access the Factory default setting. A prompt will be 

shown at the screen, “restore factory setting?“. Rotate the volume knob to set, 

press it again to confirm and exit the Factory default setting.

6. Time mode

Press the volume knob to access the Time mode setting. There are 2 options, 

24HR-12HR. Rotate the volume knob to set, press it again to confirm and exit 

the Time mode setting. The factory default Time mode is 24HR.

7. Radio Area

Press the volume knob to access the Radio Area. There are 3 options, Europe-

America 1-America 2. Rotate the volume knob to set, press it again to confirm 

and exit the Radio Area setting

Summary of Contents for BV7280

















Reviews: