Specifications
NOTE:
Specifications and design are subject to modification, without notice,
due to improvements in technology.
Supply voltage : 12V DC(11V-15V)
Current consumption : Less than 10A
Audio Signal Output : 2ch line out
Characteristics : (1) Frequency Response: 20Hz-20KHz
(2) S/N Ratio: 50 dB(JIS)
(Europe) (U.S.A.)
FM FM
Frequency Coverage: 87.5 to 108Mhz 87.5 to 107.9Mhz
IF 10.7Mhz 10.7Mhz
Sensitivity (S/N = 30dB) : 20dBu 20dBu
AM AM
Frequency Coverage: 522 to 1620Khz 530 to 1710Khz
IF 450Khz 450Khz
Sensitivity (S/N = 20dB) : 45dBu 45dBu
Trouble Shooting
Before going through the check list, check wiring connection. If any of the problems persist after check
list has been made, consult your nearest service dealer.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
Symptom
No power
Cause
The fuse is blown.
Volume is in minimum.
No sound
The antenna cable is not
connected.
The signal are too weak.
Insert the antenna cable firmly.
Select a station manually.
The radio does not
work.
The radio station
automatic selection
does not work.
Wiring is not properly
connected.
Adjust volume to a desired level.
Check wiring connection.
Replace the fuse.
The car ignition is not on.
If the power supply is properly connected
to the car accessory terminal, switch the
ignition key to " ACC "
Solution
