background image

6

     

REMOVING THE FRONT PANEL 

1. Press the release button on the front       

panel and pull off the front panel. 

 

2. Keep front panel into the case. 

 

INSTALLING THE FRONT PANEL 

To install the front panel, insert the panel 

into the housing and make sure the panel 

is properly installed. Otherwise, 

abnormality occurs on the display or some 

keys will not function properly. 

 

Precautions when handing 

1. 

Do not drop the front panel. 

.

Precautions when handling

 

1.  Do not drop the front panel. 

2.  Do not put pressure on the display or 

control buttons when detaching or 

re-installing the front panel.   

3.  Do not touch the contacts on the front 

panel or on the main unit body. It may 

result in poor electrical contact. 

4.  If any dirt or foreign substances 

adhered on the contacts, they can be 

removed with a clean and dry cloth. 

5.  Do not expose the front panel to high 

temperatures or direct sunlight in 

anywhere. 

6.

Keep away any volatile agents (e.g. 

benzene, thinner, or insecticides) from 

touching the surface of the front panel

7.  Do not attempt to disassemble the front 

panel. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USING THE DETACHABLE FRONT PANEL 

6

     

REMOVING THE FRONT PANEL 

1. Press the release button on the front       

panel and pull off the front panel. 

 

2. Keep front panel into the case. 

 

INSTALLING THE FRONT PANEL 

To install the front panel, insert the panel 

into the housing and make sure the panel 

is properly installed. Otherwise, 

abnormality occurs on the display or some 

keys will not function properly. 

 

Precautions when handing 

1. 

Do not drop the front panel. 

.

Precautions when handling

 

1.  Do not drop the front panel. 

2.  Do not put pressure on the display or 

control buttons when detaching or 

re-installing the front panel.   

3.  Do not touch the contacts on the front 

panel or on the main unit body. It may 

result in poor electrical contact. 

4.  If any dirt or foreign substances 

adhered on the contacts, they can be 

removed with a clean and dry cloth. 

5.  Do not expose the front panel to high 

temperatures or direct sunlight in 

anywhere. 

6.

Keep away any volatile agents (e.g. 

benzene, thinner, or insecticides) from 

touching the surface of the front panel

7.  Do not attempt to disassemble the front 

panel. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USING THE DETACHABLE FRONT PANEL 

 

 

 

Summary of Contents for 644UA


















Reviews: