INTRODUCTION
About BG-526 Trail Camera
The BOSKON BG-526 Camera is a digital scouting camera, It can be triggered by any movement
of game in a location, detected by a highly sensitive Passive Infra-Red (PIR) motion sensor, and
then take high quality pictures up to 12MP photos, or record HD 1080P
(1920*1080) video
clips.
The BG-526 Camera consumes very little power ( less than 0.18mA ) in a stand-by (surveillance)
state. This means it can deliver up to 12 month stand-by operation time when the device is
powered by utilizing lithium 8 AA batteries. Once motion in the monitored area is detected, the
digital camera unit will be triggered at once (normally within 0.6 second) and then automatically
take photos or videos according to previously programmed settings. The BG-526 Camera is
equipped with built-in infrared LEDS that function as a flash, so that it delivers clear photos or
videos (in black & white) even in the dark, and it can take color photos or videos under sufficient
daylight. The BG-526 Camera
is designed for outdoor use and is resistant against water and
snow.
Applications
The BG-526 Camera can be used as a trail camera for hunting or scouting game.
The BG-526 Camera also can be used for invasion evidence surveillance usage
Parts and Controls
The BG-526 Camera provides the following connections for external devices: USB port, Micro
SD card slot, External DC Power (See Figure 3).
A 3-way power switch is used to select the main operating modes:
OFF, SETUP
and
ON
(See
Figure 3).
A control key interface with seven Keys is primarily used in SETUP mode to select operational
functions and parameters. As shown in Fig 2, these Keys are:
UP, Down, Left, Right,
Play&Shot,OK
and
Menu
.
UP ,Down, Left
and
Right
Key can be used to choose function
mode and setup camera .
The
OK
Key is used to confirm the Menu, and
Shot&Play Key is
for
playing back photos or videos and shooting photos or videos on setup mode. .
Menu
Key is used
to show camera Menu in Setup Mode or Exit to Main Menu