Boser HS-6010, Manual, Page: 20 / 37

18
2.13 PCI VGA Controller
The HS-6010 has built-in a S3 86C375 VGA Controller with on-board 2
MB memory, support resolutions up to 1280 x 1024 256 colors,
reserved internal 10-pin VGA-CRT header connector.
To get more VGA drivers information, please refer to the S3’s internet
address:
WWW.S3.COM
2.14 DiskOnChip
?
Address Setting
The HS-6010 provides a U17 socket for install the DiskOnChip
?
module.
A JP7 may select the starting memory address of the DiskOnChip
?
(D.O.C.) for avoid the mapping area with any other memory devices. If
you have another extra memory devices in the system with the same
memory, neither the HS-6010 nor the extra memory devices will
function normally. Please setting both at different memory address
mapping.
??
JP7 : DiskOnChip
?
Address
Memory Address Mapping JP7
D000 * 1-2
D800 3-4
E000 5-6
E800 7-8
*) : default setting
The D.O.C. function allows the system in using without FDD nor HDD.
The D.O.C. may formatting as driver C: or driver A:. User may also
easily uses the DOS's commands such as FORMAT, SYS, COPY,
XCOPY, DISCOPY and DISKCOMP etc. This is means that the
D.O.C. may uses as driver-A if the system without FDD-A for ambient
application. Please contact with your supplier for different size D.O.C.
module.