8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware of
HS-6010. At first, please follow up sections 1.3, 2.1 and 2.2 in check
the delivery package and carefully unpacking. Following after, the
jumpers setting of switch, watchdog timer and the DiskOnChip
?
address selection etc.
2.1 Caution of Static Electricity
The HS-6010 has been well package with an anti-static bag in protect
its sensitive computer components and circuitry from the damage of
static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against
the static electric discharge whenever you handle the board:
1. Please use a grounding wrist strap on whoever needs to handle the
HS-6010. Well clip the ALLIGATOR clip of the strap to the end of the
shielded wire lead from a grounded object. Please put on and
connect the strap before handle the HS-6010 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or tools
on the pad whenever you work on them outside the computer. You
may also in use the anti-static bag instead the pad. Please ask from
your local supplier in help up your necessary parts on anti-static
requirement.
Summary of Contents for HS-6010
Page 12: ...10 2 3 HS 6010 s Layout...
Page 14: ...12 U17 DiskOnChip SOCKET...