40
5.2 VGA DRIVER INSTALL FOR WIN NT4.0
1. Click the Start button, then go to Settings and click on Control Panel.
2. Click on Display icon to start the Display Properties window.
3. Click on the Settings tab, and then click on Display Type.
4. In the Change Display Type window, click on “Have Disk”.
5. Specify the path to the new driver and press the <ENTER>key.
(if in driver A:, type a:\nt40)
select
Chips Video Accelerator
(655545/48/50/54/55/68554 69000)
6. click OK or press Enter
7. You will then see warning panel about Third Party Drivers. Click on Yes to finish the
install.
8. Once the installation is complete, the system must shut down and restart for the
new driver to take effect.
9. After restart, checking on the VGA driver, the properties of the driver should look
similar to the following figure.
