background image

 

 

Copyrights

 

This manual is copyrighted and all rights are reserved. It is not allow any non 
authorization in copied, photocopied, translated or reproduced to any electronic or 
machine readable form in whole or in part without prior written consent from the 
manufacturer. 

In general, the manufacturer will not be liable for any direct, indirect, special, 
incidental or consequential damages arising from the use of inability to use the 
product or documentation, even if advised of the possibility of such damages. 

The manufacturer keeps the rights in the subject to change the contents of this 
manual without prior notices in order to improve the function design, performance, 
quality and reliability. The author assumes no responsibility for any errors or 
omissions, which may appear in this manual, nor does it make a commitment to 
update the information contained herein. 

Trademarks

 

BOSER is a registered trademark of BOSER Technology Co., Ltd. 
ISB is a registered trademark of BOSER Technology Co., Ltd. 
Intel is a registered trademark of Intel Corporation. 
Award is a registered trademark of Award International Inc. 

All other trademarks, products and or product's name mentioned herein are 
mentioned for identification purposes only, and may be trademarks and/or registered 
trademarks of their respective companies or owners. 

 

© Copyright 2003 
All Rights Reserved.  
User Manual edition 1.2, March 06, 2003

Summary of Contents for HS-2601



















































Reviews: