Boser HS-1743, Manual

Page: 41 / 56

35
4.5 Advanced PCI/PnP Settings
This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system that allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below
sections may cause system to
malfunction.
Clean NVRAM [No]
Plug & Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Enabled]
Offboard PCI/ISA IDE Card [Auto]
IRQ3 [Available]
IRQ4 [Available]
IRQ5 [Available]
IRQ7 [Available]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ14 [Available]
IRQ15 [Available]
DMA Channel 0 [Available]
DMA Channel 1 [Available] Select Screen
DMA Channel 3 [Available] Select Item
DMA Channel 5 [Available]
ª
-
Change Field
DMA Channel 6 [Available] Tab Select Field
DMA Channel 7 [Available] F1 General Help
F10 Save and Exit
Reserved Memory Size [Disabled] ESC Exit
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.