27
Chapter 4
AMI BIOS Setup
The HS-1743 uses AMI BIOS for the system configuration. The AMI
BIOS setup program is designed to provide the maximum flexibility in
configuring the system by offering various options that could be
selected for end-user requirements. This chapter is written to assist
you in the proper usage of these features.
4.1 Starting
Setup
The AMI BIOS is immediately activated when you first power on the
computer. The BIOS reads the system information contained in the
CMOS and begins the process of checking out the system and
configuring it. When it finishes, the BIOS will seek an operating system
on one of the disks and then launch and turn control over to the
operating system.
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1.
By pressing <Del> immediately after switching the system on, or
2.
By pressing the <F1> key when the following message appears
briefly at the bottom of the screen during the POST (Power On Self
Test).
Press F1 to Run SETUP.
Summary of Contents for HS-1743
Page 14: ...8 3 2 Board Layout Top Side...
