background image

 

2

Anti-vibration

 

 

With an unique anti-vibration design, All of BPF series Panel PC have 
been approved for vibration tests at Intel® Atom™ N270 processor 
1.6GHz in operation mode with Hard Disk 

Ultra slim design: 55~61 mm thickness 

With streamlined mechanical layout, the BPF series panel PC has an 
ultra slim thickness for space-limited environment. It does not only 
decrease maintenance time but also saves the space considerably. 

Cost-effective Fanless Embedded System 

 

The BPF series Panel PC, a fanless embedded computer, is powered 
by an ultra low power processor, Intel® Atom™ N270 processor 
1.6GHz. The total power consumption of the system is under 27W 
merely. It generates the best valve for both power usage and cost 
saving. Without hard disk space and extra add-on cards, All of BPF 
series panel PC present an ultra slim design and provides a 
cost-effective alternative for users. 

1.1 Major 

Features 

The BPF-3307 series comes with the following features: 

 

Fanless, aluminum front panel design 

 

7” TFT color panel display 

 

Built-in touch screen, HS-3658+Intel® Atom™ N270 processor 1.6GHz, 
+12V~+24V DC in 

 

Onboard graphics, GB ethernet, audio controller 

 

1 x 2.5” SATA HDD space 

 

Provides 2W AMP with Stereo Speaker 

 

BPF-3307-S provides 2 x COM, 2 x USB2.0, mini PCI socket, mini 
PCIex1 socket 

1.2 Specifications 

 

System 

 

SBC Model

  

HS-3658 

 

CPU

 

Intel® Atom™ N270 processor 1.6GHz 

 

BIOS 

Award PnP Flash BIOS 

Summary of Contents for BPF-3307

























Reviews: