BOSER Technology HS-1760, Manual, Page: 18 / 54

12
z CN3/CN5: LVDS Interface Connector
PIN Description PIN Description
1
2
13
14
1 V
LCD
2 V
LCD
3 GND 4 GND
5 A0-/B0- 6 A0+/B0+
7 A1-/B1- 8 A1+/B1+
9 A2-/B2- 10 A2+/B2+
11 CLK1-/CLK2- 12 CLK1+/CLK2+
13 A3-/B3- 14 A3+/B3+
NOTE:
LVDS cable should be produced very carefully. A0- & A0+ have to
be fabricated in twister pair (A1- & A1+, A2- & A2+ and so on)
otherwise the signal won’t be stable. Please set the proper voltage
of your panel using JP6 before proceeding on installing it.
z JP6: Inverter Power Connector
PIN Description
1 6
1 +12V
2 +12V
3 VCC
4 BK_EN
5 LCD_EN
6 GND
NOTE: If use CN3 only, it just supports 24-bit single channel LVDS panel;
If you want to use 48-bit dual channel LVDS panel, please use CN3
and CN5 combined.
The HS-1760 has an onboard jumper that selects the working voltage
of the flat panel connected to the system. Jumper
JP3 offers two
voltage settings for the user.
z JP3: Panel Voltage Select
Options Settings
1
3
+3.3V (default) Short 2-3
+5V Short 1-2
z JP18/JP19: External PCIe x16 Slot Enabled/Disabled Select
Options
Settings
JP18 JP19
Enabled Short Short 2-3
Disabled (default) Open Short 1-2
1
3
2 1