Bose Wireless Computer Speaker, Owner'S Manual

Page: 4 / 64

4
S
AFETY
I
NFORMATION
English TAB 6, 14 TAB 8, 16 TAB 7, 15 TAB 3, 11 TAB 5, 13 TAB 2, 10 TAB 4, 12
Information about products that generate
electrical noise
U.S.A. only
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, this is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference by one or
more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the one to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation
could void the user’s authority to operate this equipment.
Canada
• This device complies with Industry Canada licence-exempt RSS
standard(s).
• Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Note:
The round connector on the bottom of the Bose
®
wireless
computer speaker is for Bose factory service use only.
Service connector –
For factory use only
Trinity_OG.book Page 4 Tuesday, May 17, 2011 11:56 AM