background image

22

C

ARE

 

AND

 M

AINTENANCE

Dansk

Italiano

Svenska

Deutsch

Nederlands

English

Français

Español

Limited warranty

Your Video Wave

®

 

46

 HDTV home entertainment system is 

covered by a limited warranty. See your product registration card 
for details. Please be sure to fill out the information section on the 
card and mail it to Bose. Failure to do so will not affect your 
limited warranty.

What you must do to obtain limited warranty service

Return the product, with proof of purchase from an authorized 
Bose dealer, using the following procedures:

1.

Contact the Bose organization in your country/region (visit 
http://Global.Bose.com/register for Bose contact information) 
for specific return and shipping instructions, including a 
Return Authorization Number.

2.

Label and ship the product, freight prepaid, to the address 
provided by the Bose organization in your country.

3.

Place any necessary Return Authorization Number promi-
nently on the outside of the carton. Cartons not bearing a 
Return Authorization Number, where required, will be refused.

Technical information

Remote control

Frequency: 2.4 GHz
Range: 33 ft (10 m)

Control console power supply rating

AC input: 100-240V

 50/60 Hz, 0.5A (0,5A)

DC output: 12V 

 20W Max.

Monitor rating

USA/Canada: 100-120V

 50/60 Hz 

XXX

W

International: 220-240V

 50/60 Hz 

XXX

W

Dual voltage: 100-120/220-240V

 50/60 Hz 

XXX

W

Licensing information

This product contains one or more free or open source software 
programs originating from third parties and distributed as part of 
the STLinux software package. Visit www.stlinux.com/download 
for further details. This free and open source software is subject 
to the terms of the GNU General Public License, GNU Library/
Lesser General Public License, or other different and/or 
additional copyright licenses, notices and disclaimers. To 
understand your rights under these licenses, please refer to the 
specific terms of the licenses, notices, and disclaimers, which are 
provided to you in an electronic file, named “licenses.pdf,” 
located within the product’s control console. To read this file, you 
will need a computer with a USB port and a software program 
that can view .pdf files. To download “licenses.pdf” from your 
product’s control console:

1.

Press and hold the Setup button on the front of the control 
console to display the System Information screen.

2.

Insert a USB drive  (there should be one included in your sys-
tem package) into the USB input on the front of the control 
console.

3.

Press the OK button on the remote control to copy the file to 
the USB drive. This download process should be completed 
within 30 seconds. You may then remove the USB drive.

4.

To read the file “licenses.pdf,” plug the USB drive into a com-
puter with a USB port, navigate to the USB root directory, and 
open “licenses.pdf” with a software program that can view 
.pdf files.

To receive a copy of the source code for the open source 
software programs included in this product, please mail your 
written request to: Licensing Manager, Mailstop 6A2, Bose 
Corporation, The Mountain, Framingham, MA 01701-9168. Bose 
Corporation will distribute such source code to you on a disc for 
a charge covering the cost of performing such distribution, such 
as the cost of media, shipping and handling. All of the above 
referenced licenses, notices and disclaimers are reproduced and 
available with such source code. This offer is valid for a period of 
three (3) years following the date of distribution of this product by 
Bose Corporation.

Summary of Contents for Video Wave 46































Reviews: